MAX14870 with raspberry pi

Im using the single MAX14870 motor driver with my Pi 3B+. I’ve connected all the cables according to the diagram in the link below. The PWM pin is plugged into GPIO 12 and the DIR pin goes to GPIO 18. There is no output from the motor driver, no sound at all, i have 2 of them, both are not working which makes me think that it’s something that I’m doing wrong. The motor is 12v and only consumes 0.75A max so likely not a power problem.

Any help is much appreciated.

Hello.

Can you post some pictures of your setup that show both sides of your motor drivers and all of your connections? Posting a copy of the program you are using to test the driver (ideally, the simplest program that demonstrates the problem) along more information about your power supply and motor would also be helpful.

- Patrick