I am using Pololu Qik 2s9v1 Dual Serial Motor Controller for my project, and i need to know Part number and/or value of Crystal used on that PCB, can any one help me with the Datasheet of Crystal or even frequency of that crystal.
We do not commit to using a specific part for the oscillator on our Qik 2s9v1, but in general it is an 8MHz resonator (not crystal). We have used Murata’s CSTCE8M00G55-R0 in the past, but they are phasing that out for their newer ones, so we will probably switch at some point. Is there a specific reason you are interested in the clock speed on the Qik?
We are designing our own PCB that goes into our product, my next question is the Firmware loaded on Attiny 2313 is it available for us to use in our own product.
We are making a robot and in the process of designing our Custom PCB with Serial Motor Driver.
We do not release the firmware for the qik.