Coding the A-Star 32U4 Micro


I have already asked this question in another post that didn’t belong to this subject and now that I have the controller in hand and have soldered the pins in, I would like to know if Pololu has an official set of instructions on how to program this board and or how to use the IDE published by Arduino.

Thanks much.


Just a note to let you know that I appreciate your looking at this message and I have already figured out there is a lot of information provided on Pololu site. I will come back if and when I have additional questions.



It sounds like you found the A-Star 32U4 user’s guide on our website, but just in case, and for others reading this post, the guide can be found under the “Resources” tab on any of the A-Star’s product pages.

- Amanda