Voltage allowed on the VL53L1X


I am making an array of these sensors to measure the distance to an object. I use a little power supply for this array since there will be 16 of them. this is the power supply used 5V 2A Adapter with DC jack - 5V2ADCADAPTER I measured the voltage supplied and this power supply actually supplies 5.1V could this damage the sensors? I want to be sure before damaging anything.

Thank you


As mentioned in the product page description and under the “Specs” tab, the maximum voltage for our VL53L1X carrier is 5.5V, so your supply should be fine.

- Patrick