TIC825 - Need clarification on Torque Setting in serial mode

Hi, Chris.

I understand how that paragraph can be confusing. For the Tic T825 the range of possible values for the current limit is broken into three sections with different resolutions: 1 - 31, 32 - 62, and 64 - 124. For the lowest range, 1 - 31, the resolution is 1, so all numbers represent actual current limits that can be set. For the T825 you multiply by 32 to get to actual milliamps, so in the lowest range you can select current limits of 32mA, 64mA, 96mA, …, 992mA. In the middle range, 32 - 62, the resolution is 2, so only every other number (every even) represents a real current limit setting: 32, 34, 36, …, 62. Those correspond to 1024mA, 1088mA, 1152mA, …, 1984mA. In the highest range, 64 - 124, the resolution is 4, so every fourth number represents a real setting: 64, 68, 72, …, 124. Those correspond to 2048mA, 2176mA, 2304mA, …, 3968mA. Note that 78 is not one of the valid settings, so if you set the limit to 78 the next highest setting will be used: 76 which corresponds to 2432mA. Also note that the T825 is only rated to handle up to 1.5A without additional cooling and 2.5A max with sufficient cooling. If you need more current, you might consider the Tic 36v4.

-Claire