Question about Pololu Micro Serial Servo Controller

Support Servo controllers and servos
1

So I now have an issue w/ my ROBOT. As soon as the power is supplied to the Pololu Micro Serial Servo Controller (Pololu item #: 207) the servos start to move randomly and then freeze. This happens with out any commands being sent to it. I removed all the servos and used a multi-meter and power is being supplied to the servo headers all the time.

Is that the correct functionality of the Pololu item #: 207?

2

Hello.

Servo power is directly connected to the servos through the board. The board only controls the signals sent to the servos.

- Ben