Maestro/Arduino 11th script issue

Hi, using an 12 channel Maestro and I have 10 sequences defined as below, however when I add an eleventh, the other get mixed up when called by the Arduino using restartScript.

So Sequence 4 works without issue, but add an eleventh and sequence 4 seems to miss steps and do parts of sequence 6, take the 11th sequence out and it works.

It does not seem to matter what the 11th script is either.

Can anyone help?

### Sequence subroutines: ###

# Sequence 0
sub Sequence_0
  600 8000 0 0 0 0 0 
  0 0 0 0 0 0 frame_0..11 # Frame 1
  500 0 frame_0 # Frame 1
Quit
  return
# Sequence 1
sub Sequence_1
  500 4160 0 0 0 0 0 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_0 # Frame 1
Quit
  return
# Sequence 2
sub Sequence_2
  500 0 0 0 0 0 0 
  0 8000 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_7 # Frame 1
quit
  return
# Sequence 3
sub Sequence_3
  500 0 0 0 0 0 0 
  0 3968 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_7 # Frame 1
quit
  return
# Sequence 4
sub Sequence_4
  500 0 0 0 0 0 3136 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 8000 frame_6 # Frame 1
  500 3968 frame_6 # Frame 2
  500 8000 frame_6 # Frame 3
  500 3968 frame_6 # Frame 4
  500 8000 frame_6 # Frame 5
  500 3987 frame_6 # Frame 6
  500 8000 frame_6 # Frame 7
  500 0 0 frame_5_6 # Frame 8
  500 3968 frame_6 # Frame 9
  500 0 frame_6 # Frame 10
quit
  return
# Sequence 5
sub Sequence_5
  500 0 0 0 0 0 6903 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_5 # Frame 1
quit
  return
# Sequence 6
sub Sequence_6
  500 0 0 0 3968 0 0 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_3 # Frame 1
quit
  return
# Sequence 7
sub Sequence_7
  500 0 0 0 8512 0 0 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_3 # Frame 1
quit
  return
# Sequence 8
sub Sequence_8
  500 0 0 0 0 8000 0 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_4 # Frame 1
quit
  return
# Sequence 9
sub Sequence_9
  500 0 0 0 0 3968 0 
  0 0 0 0 0 0 frame_0..11 # Frame 0
  500 0 frame_4 # Frame 1
quit
  return

sub frame_0..11
  11 servo
  10 servo
  9 servo
  8 servo
  7 servo
  6 servo
  5 servo
  4 servo
  3 servo
  2 servo
  1 servo
  0 servo
  delay
  return

sub frame_0
  0 servo
  delay
  return

sub frame_1
  1 servo
  delay
  return

sub frame_7
  7 servo
  delay
  return

sub frame_6
  6 servo
  delay
  return

sub frame_5_6
  6 servo
  5 servo
  delay
  return

sub frame_5
  5 servo
  delay
  return

sub frame_3
  3 servo
  delay
  return

sub frame_4
  4 servo
  delay
  return

Hello.

Could you post a copy of your full Maestro settings file with all 11 sequences included in your script as well as a copy of the Arduino code you are running? You can save a copy of your Maestro settings file from the “File” drop-down menu of the Maestro Control Center while the controller is connected.

Brandon