Maestro 6 channel starting sequence

Support Servo controllers and servos
8

Hi Brandon!

I have tried this method, and keep getting the following error:

The script has stopped because of an error. You must restart the device to continue.

Any ideas? I am using a Maestro 12 and my button is on the last channel (11).

begin
11 get_position 200 greater_than while #wait in while loop until button connected to channel 5 is pushed

750 6784 256 13120 3456 10944 0
0 0 0 0 0 frame_0…10 # Start
1000 4814 frame_1 # Tilt Right
1000 256 6125 frame_1_2 # Tilt Left
1000 13120 frame_2 # Face Forward
500 4160 frame_0 # Jaw Open 1
500 6784 frame_0 # Jaw Closed 1
500 4160 frame_0 # Jaw Open 2
1000 6743 frame_0 # Jaw Closed Two
5000 2727 8800 frame_3_4 # Start Pour
1000 3456 10944 frame_3_4 # End Pour
repeat

sub frame_0…10
10 servo
9 servo
8 servo
7 servo
6 servo
5 servo
4 servo
3 servo
2 servo
1 servo
0 servo
delay
return

sub frame_1
1 servo
delay
return

sub frame_1_2
2 servo
1 servo
delay
return

sub frame_2
2 servo
delay
return

sub frame_0
0 servo
delay
return

sub frame_3_4
4 servo
3 servo
delay
return