hello?
run PonyProg2000 v2.7c program.
fusebit atmega168-20mhz?
low = 0x62
high = 0xdf
extended = f9
right?
hello?
run PonyProg2000 v2.7c program.
fusebit atmega168-20mhz?
low = 0x62
high = 0xdf
extended = f9
right?
Hello,
Please don’t change the fuse bits on your 3pi, because you can permanently damage it with the wrong settings. It is shipped with correct settings, and the I think settings you posted are wrong.
-Paul