Controlling two Stepper Motors with two ICs and one Raspberry Pi 3B+

Robotics and electronics discussion Electronics
3

I’m using a 12V/4A power supply. But I also tried to power each stepper with an own power supply. Both times VREF on the second driver was 0V.

IMG_20190105_113213
IMG_20190105_1132134608×3456 4.39 MB
IMG_20190105_113339
IMG_20190105_1133394608×3456 3.68 MB
IMG_20190105_113417
IMG_20190105_1134174608×3456 3.8 MB