Trouble finding a 7-pin header connector for Mini Maestro

Support Servo controllers and servos
1

Hi everyone! First post here.

I’m having trouble finding a 7-pin 0.1" connector to use with a Mini Maestro Controller. The header in question is the row of 7 pins in the bottom left of this photo: https://www.pololu.com/picture/view/0J2330

What do people usually use to connect to those pins?

This is the closest product I found, but it’s only 5 pins: http://www.amazon.com/StarTech-com-USBINT5PIN-18-Inch-Internal-Motherboard/dp/B003HHROBG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1328398370&sr=1-1

Thanks for your help!

2

Hello,

You could make your own cable using our wires with pre-crimped terminals and crimp connector housings. Alternatively, if you don’t care about keeping the wires together (or don’t want to use all of the pins), you could just use individual jumper wires.

- Kevin