Hi, I am using a 18 channel Mini Maestro. I have a basic query about the sampling time of the channel when it is selected to be an analog input channel and Is there a way to change the sampling time of the channel ?
If you have a single analog input channel enabled, we expect the Maestro to read the channel’s voltage and update its reading several times per millisecond. The exact rate depends on how busy the Maestro is doing other tasks, and the analog readings will not always be evenly spaced. In general, the update rate will be the single-channel update rate described above divided by the number of analog input channels that are enabled. So, if you have two analog input channels enabled, they would be updated at half the rate. There is no way to change this sampling time.