I have two Zumo32u4 bots. I want both of them to detect each other, hence I am using IR Beacon transceivers.
I soldered them up (as shown in attached video). When I apply 8 or 10V at + terminal of IR beacon and GND at - input terminals, nothing happens. Even the Green LED (as shown in the Product description of IR Beacon) does not blink and I am also not able to see the IR LEDs using a digital camera as well. What might be the issue?
As soon as I put 5V on the Enable pin, the Red LEDs blink alternately as in the video:-
Please let me know if I am doing anything wrong or why are IR Beacons not powering up?