Flight Motion platform with 64SPU-1

Hello, I would like to ask for advice. I bought 64 SPU-1 BFF design for building the motion platform with Microsfot Flight smulator. First I would like to construct just little model of that. So I need servo controller desk. I will use 3 servo motors so I am interested to buy this type of card
Micro Maestro 6-Channel USB Servo Controller (Assembled)

Whereas I am amateur I need help to be sure that this card is compatible with my processing unit.
Instead of using MDO3 DC controllers I will use this Maestro 6 - Channel

This is my Processing unit.


Thank you very much.

Filip Dymák
Czech Republic

Hello, Filip.

I am not familiar with that processing unit, but it looks like it can only communicate with motion controllers through I2C. The Maestro Servo Controllers accept USB or TTL serial signals only, so these two boards are not compatible. I do not know where you might find an I2C servo controller.