Thank you.
Only thing attached is ZIFF. The ZIFF is wired for tiny13, tiny 85 and tiny84.
Tiny13 and 85 program (no problems).
Tiny84 is wired to the same pins as 13&85 (meaning SCK MOSI MISO with different pin numbers but get their life from same pins as for 13/85).
I traced out the pins - all are connected properly (and wiring is thesame as on my homemade programmer).
Attached photo shows the Pololu mounted with BreadBoard/ZIFF…
Not shown are cap’s I added to see if it helped (they didn’t so, I removed them).
