Pololu Robotics & Electronics
My account Comments or questions? About Pololu Contact Ordering information Distributors

Support   Servo controllers and servos

Can we edit the range of pulse? (3)
Set range to [1100, 1900] (3)
Maestro 'Apply Settings' button erases speed and acceleration values (2)
How to control 4 servos with 2 push button switches (3)
Adding switches to the servo controllersv (10)
Micro Maestro 6-Channel Button "Resistor" (6)
Some functions of Arduino Pololu library do not seem to work (9)
Maestro 12 channel & 4 DS3218 20KG servos (4)
Is it possible that a pololu maestro 12 can be used with JMRI (3)
Changing channel modes (19)
Micro Maestro Controlled via Max/Msp (2)
Micro Maestro 6-Channel (Newb) scripting simple 3 position servo project (5)
Configuration for daisy chained Mini Maestros (2)
BackUp Custom Firmware (Maestro 6 Servo Controller) (2)
Reading identifier from Mini Maestro (9)
Micro Maestro on button 0 won't work (Update) (7)
Potentiometer Input with Hysteresis (2)
Maestro USB C++ windows 10 (3)
Newb question-Servros for the Maestro (2)
Maestro Control Center gives error on Raspberry PI 2 (2)
Maestro 6 channel starting sequence (5)
Pololu Maestro mini getMovingStatus() issue (5)
Servo not moving arm - will turn on light (17)
Help changing speed while program run (4)
I need help with my micro maestro 6-channel servo controller (9)
Disable all servos in sketch after it runs (3)
Pir sensor used with mini maestro (16)
Maestro 18 sdk with Raspberry (2)
1 button and 7 servo motor control with maestro 12 (4)
Maximum length of sequences for servo controller? (2)