Pololu Robotics & Electronics
Menu
My account Comments or questions? About Pololu Contact Ordering information Distributors

Support   Sensors


About the Sensors category (1)
VL6180X Startup-Issue (16)
QTR-8A not read correctly ( 2 ) (27)
Line Follower Problem (Qtr 8Rc - L298N) (6)
Vl53l0x schematics (bom specs) (2)
VL53L0X and solenoide issue (11)
QTR 8A sensor issues (3)
Pololu - Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V (3)
What is the part number and name of the sensor regulator in VL53L0X? (9)
GP2Y0D815Z0F slotcar application (4)
Under what license are your 3D models? (1)
Looking for a stable compass (4)
Using multiple VL53L1X with arduino (4)
VL53L0X not very accurate at all (9)
QTR-8RC connection pins arduino (3)
Sharp Digital Distance Sensor - Dead spot in middle (4)
LISMDL AltImu-10 v5 and Teensy 3.2 Magnetometer accuracy issues (7)
Reading zero value for ranging from Pololu VL53L0X (3)
White line follower (2)
GP2Y0D805Z0F raspberry pi (2)
Multiple VL53L1X and memory problems (2)
VL53L1X library not working (13)
Line following robot code (8)
QTRX Sensors A vs. RC (5)
MinIMU-9 v5 (4)
VL53L0X Noisy Problem In Air Garp (17)
QTR difference between new and old sensors (6)
QTRXL Sensor (2)
VL53L0X settings ( 2 ) (32)
Qtr 8a raw values problem (3)