I know its troublesome but could anyone take a look at this breadboard picture and tell me if I made the correct connections that the schematic called for?
I made the breadboard on Fritzing and tried using the schematic version of it to check agaist the correct schematic, and I think the connections are indeed correct, but they’re too convoluted for me to be sure.
[The resistors are necessary to prevent the motor from killing the driver because the motor draws more current (2.8 A) than the driver can give (1A)]
My breadboard is here:
i47.tinypic.com/f21q21.png
Compare with:
i48.tinypic.com/dw4a47.jpg