Shorter Headers / Pins

I’ve been using the 2x7 headers Pololu sells:
pololu.com/catalog/product/1027

But these when coupled with typical snappable header strips spaces the boards at 7/16th of an inch which is pretty darn big, for a small product.

Are there any groovy header solutions out there now which equally modular and workable, but lower profile?

Thanks for any insight!
Mike in Alaska

Hi;

Do you specifically need the 0.1" pitch? 2mm headers are not that much harder to work with if you don’t have to use something like a breadboard, and they are a lot shorter.

- Jan