Geiger counter code

Hello to everybody,
I will go back to the past, regarding a post about a geiger counter circuit. My problem is that I can’t compile the AVR code with AVR Studio and WINAVR (I’m newbie in AVR programming). I need the .hex file to burn into the microcontroller.
I found the code in this page


Any help would be acceptable.

Thank you in advance,

Dimitris

Hello.

You should post this in the original thread rather than linking to it. That way the original poster can receive an automatic alert that there was activity in his thread (if he is set up to be notified about that), and everything related to project is in one location.

- Ben