geiger counter code

Technical discussions about software, control algorithms, and programming languages.

geiger counter code

Postby SPECTRUM » Thu Apr 21, 2011 12:23 am

Hello to everybody,
I will go back to the past, regarding a post about a geiger counter circuit. My problem is that I can't compile the AVR code with AVR Studio and WINAVR (I'm newbie in AVR programming). I need the .hex file to burn into the microcontroller.
I found the code in this page
viewtopic.php?t=1453#p6685
Any help would be acceptable.

Thank you in advance,

Dimitris
SPECTRUM
 
Posts: 2
Joined: Wed Apr 20, 2011 11:02 pm

Re: geiger counter code

Postby Ben » Thu Apr 21, 2011 9:04 am

Hello.

You should post this in the original thread rather than linking to it. That way the original poster can receive an automatic alert that there was activity in his thread (if he is set up to be notified about that), and everything related to project is in one location.

- Ben
User avatar
Ben
Pololu Employee
 
Posts: 3454
Joined: Mon Aug 28, 2006 12:05 pm
Location: Las Vegas, NV


Return to Software and Microcontrollers

Who is online

Users browsing this forum: No registered users and 2 guests