Whenever i try to program the baby orangutan it says
"Failed to run program
Error: Failed to start programming session before chiperase"
Also the atmega 328 on the orangutan gets really hot whenever i connect it to a battery. I have tried two different batteries, one 12v nimh battery pack and another 4xAA battery pack. Whenever i connect the 12v nimh battery the green led on the orangutan starts to flicker very fast, but remains stable when i connect the 4xAA battery pack.
I may have inadvertantly damaged the baby orangutan because earlier when i tried to program it i had put the isp header the wrong way. Is it surely damaged or is there some other issue?